TCrossNet Class Reference

Implements a single CrossNet consisting of edges between two TModeNets (could be the same TModeNet) More...

#include <mmnet.h>

Collaboration diagram for TCrossNet:

Classes
class	TAFltI
	Node/edge float attribute iterator. Iterates through all nodes/edges for one float attribute. More...
class	TAIntI
	Node/edge integer attribute iterator. Iterates through all nodes/edges for one integer attribute. More...
class	TAStrI
	Node/edge string attribute iterator. Iterates through all nodes/edges for one string attribute. More...
class	TCrossEdge
	A single edge in the cross net. Has an Edge Id, and the source and destination node ids. (Mode ids are implicit from TCrossNet) More...
class	TCrossEdgeI
	Edge iterator. Only forward iteration (operator++) is supported. More...
class	TLoadVecInit

Public Member Functions
	TCrossNet ()
	TCrossNet (TInt MId1, TInt MId2, TInt LId)
	TCrossNet (TInt MId1, TInt MId2, TBool IsDir, TInt LId)
	TCrossNet (TSIn &SIn)
	TCrossNet (const TCrossNet &OtherTCrossNet)
TCrossNet &	operator= (const TCrossNet &OtherTCrossNet)
bool	IsEdge (const int &EId) const
	Tests whether an edge with edge ID EId exists in the graph. More...
int	GetMxEId () const
int	GetEdges () const
	Returns the number of edges in the graph. More...
void	Clr ()
	Deletes all nodes and edges from the graph. More...
int	AddEdge (const int &sourceNId, const int &destNId, int EId=-1)
	Adds an edge to the CrossNet; Mode1 NId should be the sourceNId always, regardless of whether edge is directed. More...
TCrossEdgeI	GetEdgeI (const int &EId) const
	Edge iterators. More...
TCrossEdgeI	BegEdgeI () const
TCrossEdgeI	EndEdgeI () const
int	DelEdge (const int &EId)
	Deletes an edge by its id. More...
int	GetMode1 () const
	Gets the id of the src mode. More...
int	GetMode2 () const
	Gets the id of the dst mode. More...
void	Save (TSOut &SOut) const
	Saves the TCrossNet to the binary stream. More...
void	LoadShM (TShMIn &ShMIn)
	Loads network from shared memory stream. More...
bool	IsDirected () const
	Whether edges in the crossnet are directed. More...
void	AttrNameEI (const TInt &EId, TStrV &Names) const
	Returns a vector of attr names for edge EId. More...
void	AttrNameEI (const TInt &EId, TStrIntPrH::TIter CrossHI, TStrV &Names) const
void	AttrValueEI (const TInt &EId, TStrV &Values) const
	Returns a vector of attr values for edge EId. More...
void	AttrValueEI (const TInt &EId, TStrIntPrH::TIter CrossHI, TStrV &Values) const
void	IntAttrNameEI (const TInt &EId, TStrV &Names) const
	Returns a vector of int attr names for edge EId. More...
void	IntAttrNameEI (const TInt &EId, TStrIntPrH::TIter CrossHI, TStrV &Names) const
void	IntAttrValueEI (const TInt &EId, TIntV &Values) const
	Returns a vector of attr values for edge EId. More...
void	IntAttrValueEI (const TInt &EId, TStrIntPrH::TIter CrossHI, TIntV &Values) const
void	StrAttrNameEI (const TInt &EId, TStrV &Names) const
	Returns a vector of str attr names for node NId. More...
void	StrAttrNameEI (const TInt &EId, TStrIntPrH::TIter CrossHI, TStrV &Names) const
void	StrAttrValueEI (const TInt &EId, TStrV &Values) const
	Returns a vector of attr values for node NId. More...
void	StrAttrValueEI (const TInt &EId, TStrIntPrH::TIter CrossHI, TStrV &Values) const
void	FltAttrNameEI (const TInt &EId, TStrV &Names) const
	Returns a vector of int attr names for node NId. More...
void	FltAttrNameEI (const TInt &EId, TStrIntPrH::TIter CrossHI, TStrV &Names) const
void	FltAttrValueEI (const TInt &EId, TFltV &Values) const
	Returns a vector of attr values for node NId. More...
void	FltAttrValueEI (const TInt &EId, TStrIntPrH::TIter CrossHI, TFltV &Values) const
int	AddIntAttrDatE (const TCrossEdgeI &EdgeI, const TInt &value, const TStr &attr)
	Attribute based add function for attr to Int value. More...
int	AddIntAttrDatE (const int &EId, const TInt &value, const TStr &attr)
int	AddStrAttrDatE (const TCrossEdgeI &EdgeI, const TStr &value, const TStr &attr)
	Attribute based add function for attr to Str value. More...
int	AddStrAttrDatE (const int &EId, const TStr &value, const TStr &attr)
int	AddFltAttrDatE (const TCrossEdgeI &EdgeI, const TFlt &value, const TStr &attr)
	Attribute based add function for attr to Flt value. More...
int	AddFltAttrDatE (const int &EId, const TFlt &value, const TStr &attr)
TInt	GetIntAttrDatE (const TCrossEdgeI &EdgeI, const TStr &attr)
	Gets the value of int attr from the edge attr value vector. More...
TInt	GetIntAttrDatE (const int &EId, const TStr &attr)
TStr	GetStrAttrDatE (const TCrossEdgeI &EdgeI, const TStr &attr)
	Gets the value of str attr from the edge attr value vector. More...
TStr	GetStrAttrDatE (const int &EId, const TStr &attr)
TFlt	GetFltAttrDatE (const TCrossEdgeI &EdgeI, const TStr &attr)
	Gets the value of flt attr from the edge attr value vector. More...
TFlt	GetFltAttrDatE (const int &EId, const TStr &attr)
TAIntI	BegEAIntI (const TStr &attr) const
	Returns an iterator referring to the first edge's int attribute. More...
TAIntI	EndEAIntI (const TStr &attr) const
	Returns an iterator referring to the past-the-end edge's attribute. More...
TAIntI	GetEAIntI (const TStr &attr, const int &EId) const
	Returns an iterator referring to the edge of ID EId in the graph. More...
TAStrI	BegEAStrI (const TStr &attr) const
	Returns an iterator referring to the first edge's str attribute. More...
TAStrI	EndEAStrI (const TStr &attr) const
	Returns an iterator referring to the past-the-end edge's attribute. More...
TAStrI	GetEAStrI (const TStr &attr, const int &EId) const
	Returns an iterator referring to the edge of ID EId in the graph. More...
TAFltI	BegEAFltI (const TStr &attr) const
	Returns an iterator referring to the first edge's flt attribute. More...
TAFltI	EndEAFltI (const TStr &attr) const
	Returns an iterator referring to the past-the-end edge's attribute. More...
TAFltI	GetEAFltI (const TStr &attr, const int &EId) const
	Returns an iterator referring to the edge of ID EId in the graph. More...
int	DelAttrDatE (const TCrossEdgeI &EdgeI, const TStr &attr)
	Deletes the edge attribute for NodeI. More...
int	DelAttrDatE (const int &EId, const TStr &attr)
int	AddIntAttrE (const TStr &attr, TInt defaultValue=TInt::Mn)
	Adds a new Int edge attribute to the hashmap. More...
int	AddStrAttrE (const TStr &attr, TStr defaultValue=TStr::GetNullStr())
	Adds a new Str edge attribute to the hashmap. More...
int	AddFltAttrE (const TStr &attr, TFlt defaultValue=TFlt::Mn)
	Adds a new Flt edge attribute to the hashmap. More...
int	DelAttrE (const TStr &attr)
	Removes all the values for edge attr. More...
bool	IsAttrDeletedE (const int &EId, const TStr &attr) const
bool	IsIntAttrDeletedE (const int &EId, const TStr &attr) const
bool	IsStrAttrDeletedE (const int &EId, const TStr &attr) const
bool	IsFltAttrDeletedE (const int &EId, const TStr &attr) const
bool	EdgeAttrIsDeleted (const int &EId, const TStrIntPrH::TIter &CrossHI) const
bool	EdgeAttrIsIntDeleted (const int &EId, const TStrIntPrH::TIter &CrossHI) const
bool	EdgeAttrIsStrDeleted (const int &EId, const TStrIntPrH::TIter &CrossHI) const
bool	EdgeAttrIsFltDeleted (const int &EId, const TStrIntPrH::TIter &CrossHI) const
TStr	GetEdgeAttrValue (const int &EId, const TStrIntPrH::TIter &CrossHI) const

Private Types
enum	{ IntType, StrType, FltType }

Private Member Functions
void	SetParentPointer (TMMNet *parent)
TInt	GetIntAttrDefaultE (const TStr &attribute) const
	Gets Int edge attribute val. If not a proper attr, return default. More...
TStr	GetStrAttrDefaultE (const TStr &attribute) const
	Gets Str edge attribute val. If not a proper attr, return default. More...
TFlt	GetFltAttrDefaultE (const TStr &attribute) const
	Gets Flt edge attribute val. If not a proper attr, return default. More...
int	GetAttrTypeE (const TStr &attr) const
TCrossEdge &	GetEdge (int eid)

Private Attributes
THash< TInt, TCrossEdge >	CrossH
TInt	MxEId
	The HashTable from Edge id to the corresponding Edge. More...
TInt	Mode1
TInt	Mode2
	The first mode. In the case of directed crossnets, this is implicitly understood to be the source mode. More...
TBool	IsDirect
	The second mode. In the case of directed crossnets, this is implicitly understood to be the destination mode. More...
TInt	CrossNetId
TMMNet *	Net
TStrIntPrH	KeyToIndexTypeE
THash< TStr, TInt >	IntDefaultsE
THash< TStr, TStr >	StrDefaultsE
THash< TStr, TFlt >	FltDefaultsE
TVec< TIntV >	VecOfIntVecsE
TVec< TStrV >	VecOfStrVecsE
TVec< TFltV >	VecOfFltVecsE

Friends
class	TMMNet
class	TModeNet

Detailed Description

Implements a single CrossNet consisting of edges between two TModeNets (could be the same TModeNet)

The class corresponding to one particular CrossNet in a TMMNet. Has a CrossNet name, and two modes. Can be either undirected or directed. If it is directed, it is directed in one direction only: from mode 1 to mode 2.

Definition at line 133 of file mmnet.h.

Member Enumeration Documentation

anonymous enum

private

Enumerator
IntType
StrType
FltType

Definition at line 278 of file mmnet.h.

{ IntType, StrType, FltType };

Constructor & Destructor Documentation

TCrossNet::TCrossNet ( )

inline

Definition at line 280 of file mmnet.h.

              : CrossH(), MxEId(0), Mode1(-1), Mode2(-1), IsDirect(), CrossNetId(), Net(), KeyToIndexTypeE(), IntDefaultsE(), StrDefaultsE(),
    FltDefaultsE(), VecOfIntVecsE(), VecOfStrVecsE(), VecOfFltVecsE() {}

TCrossNet::TCrossNet ( TInt  MId1, TInt  MId2, TInt  LId  )

inline

Definition at line 282 of file mmnet.h.

                                            : CrossH(), MxEId(0), Mode1(MId1), Mode2(MId2), IsDirect(true),CrossNetId(LId), Net(),
    KeyToIndexTypeE(), IntDefaultsE(), StrDefaultsE(), FltDefaultsE(), VecOfIntVecsE(), VecOfStrVecsE(), VecOfFltVecsE() {}

TCrossNet::TCrossNet ( TInt  MId1, TInt  MId2, TBool  IsDir, TInt  LId  )

inline

Definition at line 284 of file mmnet.h.

                                                         : CrossH(), MxEId(0), Mode1(MId1), Mode2(MId2), IsDirect(IsDir),CrossNetId(LId), Net(),
    KeyToIndexTypeE(), IntDefaultsE(), StrDefaultsE(), FltDefaultsE(), VecOfIntVecsE(), VecOfStrVecsE(), VecOfFltVecsE() {}

TCrossNet::TCrossNet ( TSIn &  SIn )

inline

Definition at line 286 of file mmnet.h.

                       : CrossH(SIn), MxEId(SIn), Mode1(SIn), Mode2(SIn), IsDirect(SIn), CrossNetId(SIn), Net(),
    KeyToIndexTypeE(SIn), IntDefaultsE(SIn), StrDefaultsE(SIn), FltDefaultsE(SIn), VecOfIntVecsE(SIn), VecOfStrVecsE(SIn), VecOfFltVecsE(SIn) {}

TCrossNet::TCrossNet ( const TCrossNet &  OtherTCrossNet )

inline

Definition at line 288 of file mmnet.h.

                                             : CrossH(OtherTCrossNet.CrossH), MxEId(OtherTCrossNet.MxEId), Mode1(OtherTCrossNet.Mode1),
    Mode2(OtherTCrossNet.Mode2), IsDirect(OtherTCrossNet.IsDirect), CrossNetId(OtherTCrossNet.CrossNetId),Net(OtherTCrossNet.Net), KeyToIndexTypeE(OtherTCrossNet.KeyToIndexTypeE), 
    IntDefaultsE(OtherTCrossNet.IntDefaultsE), StrDefaultsE(OtherTCrossNet.StrDefaultsE), FltDefaultsE(OtherTCrossNet.FltDefaultsE), VecOfIntVecsE(OtherTCrossNet.VecOfIntVecsE),
    VecOfStrVecsE(OtherTCrossNet.VecOfStrVecsE), VecOfFltVecsE(OtherTCrossNet.VecOfFltVecsE) {}

Member Function Documentation

int TCrossNet::AddEdge	(	const int &	sourceNId,
		const int &	destNId,
		int	EId = -1
	)

Adds an edge to the CrossNet; Mode1 NId should be the sourceNId always, regardless of whether edge is directed.

Definition at line 233 of file mmnet.cpp.

References THash< TKey, TDat, THashFunc >::AddDat(), TModeNet::AddNeighbor(), CrossH, CrossNetId, FltDefaultsE, TMMNet::GetCrossName(), THash< TKey, TDat, THashFunc >::GetDat(), GetFltAttrDefaultE(), GetIntAttrDefaultE(), THash< TKey, TDat, THashFunc >::GetKeyId(), THash< TKey, TDat, THashFunc >::GetKeyV(), TStr::GetNullStr(), GetStrAttrDefaultE(), TVec< TVal, TSizeTy >::Ins(), IntDefaultsE, IsDirect, TNEANet::IsNode(), KeyToIndexTypeE, TVec< TVal, TSizeTy >::Len(), M1, M2, TInt::Mn, TFlt::Mn, Mode1, Mode2, TMath::Mx(), MxEId, Net, StrDefaultsE, TMMNet::TModeNetH, TPair< TVal1, TVal2 >::Val2, VecOfFltVecsE, VecOfIntVecsE, and VecOfStrVecsE.

Referenced by TSnap::LoadCrossNet().

                                                                       {
  if (EId == -1) { EId = MxEId;  MxEId++; }
  else { MxEId = TMath::Mx(EId+1, MxEId()); }
  if (Net != NULL) {
    TModeNet& M1 = Net->TModeNetH.GetDat(this->Mode1);
    TModeNet& M2 = Net->TModeNetH.GetDat(this->Mode2);
    if (!M1.IsNode(sourceNId) || !M2.IsNode(destNId)) { return -1; }
    TStr ThisCrossName = Net->GetCrossName(this->CrossNetId);
    M1.AddNeighbor(sourceNId, EId, true, ThisCrossName, Mode1==Mode2, IsDirect);
    M2.AddNeighbor(destNId, EId, false, ThisCrossName, Mode1==Mode2, IsDirect);
  }
  TCrossNet::TCrossEdge newEdge(EId, sourceNId, destNId);
  CrossH.AddDat(EId, newEdge);
  int i;
  // update attribute columns
  for (i = 0; i < VecOfIntVecsE.Len(); i++) {
    TVec<TInt>& IntVec = VecOfIntVecsE[i];
    int KeyId = CrossH.GetKeyId(EId);
    if (IntVec.Len() > KeyId) {
      IntVec[KeyId] = TInt::Mn;
    } else {
      IntVec.Ins(KeyId, TInt::Mn);
    }
  }
  TVec<TStr> DefIntVec = TVec<TStr>();
  IntDefaultsE.GetKeyV(DefIntVec);
  for (i = 0; i < DefIntVec.Len(); i++) {
    TStr attr = DefIntVec[i];
    TVec<TInt>& IntVec = VecOfIntVecsE[KeyToIndexTypeE.GetDat(DefIntVec[i]).Val2];
    IntVec[CrossH.GetKeyId(EId)] = GetIntAttrDefaultE(attr);
  }

  for (i = 0; i < VecOfStrVecsE.Len(); i++) {
    TVec<TStr>& StrVec = VecOfStrVecsE[i];
    int KeyId = CrossH.GetKeyId(EId);
    if (StrVec.Len() > KeyId) {
      StrVec[KeyId] = TStr::GetNullStr();
    } else {
      StrVec.Ins(KeyId, TStr::GetNullStr());
    }
  }
  TVec<TStr> DefStrVec = TVec<TStr>();
  StrDefaultsE.GetKeyV(DefStrVec);
  for (i = 0; i < DefStrVec.Len(); i++) {
    TStr attr = DefStrVec[i];
    TVec<TStr>& StrVec = VecOfStrVecsE[KeyToIndexTypeE.GetDat(DefStrVec[i]).Val2];
    StrVec[CrossH.GetKeyId(EId)] = GetStrAttrDefaultE(attr);
  }

  for (i = 0; i < VecOfFltVecsE.Len(); i++) {
    TVec<TFlt>& FltVec = VecOfFltVecsE[i];
    int KeyId = CrossH.GetKeyId(EId);
    if (FltVec.Len() > KeyId) {
      FltVec[KeyId] = TFlt::Mn;
    } else {
      FltVec.Ins(KeyId, TFlt::Mn);
    }
  }
  TVec<TStr> DefFltVec = TVec<TStr>();
  FltDefaultsE.GetKeyV(DefFltVec);
  for (i = 0; i < DefFltVec.Len(); i++) {
    TStr attr = DefFltVec[i];
    TVec<TFlt>& FltVec = VecOfFltVecsE[KeyToIndexTypeE.GetDat(DefFltVec[i]).Val2];
    FltVec[CrossH.GetKeyId(EId)] = GetFltAttrDefaultE(attr);
  }
  return EId;
}

Here is the call graph for this function:

Here is the caller graph for this function:

int TCrossNet::AddFltAttrDatE ( const TCrossEdgeI &  EdgeI, const TFlt &  value, const TStr &  attr  )

inline

Attribute based add function for attr to Flt value.

Definition at line 410 of file mmnet.h.

References AddFltAttrDatE(), and TCrossNet::TCrossEdgeI::GetId().

Referenced by AddFltAttrDatE(), and TSnap::LoadCrossNet().

{ return AddFltAttrDatE(EdgeI.GetId(), value, attr); }

Here is the call graph for this function:

Here is the caller graph for this function:

int TCrossNet::AddFltAttrDatE	(	const int &	EId,
		const TFlt &	value,
		const TStr &	attr
	)

Definition at line 516 of file mmnet.cpp.

References TVec< TVal, TSizeTy >::Add(), THash< TKey, TDat, THashFunc >::AddDat(), CrossH, FltType, THash< TKey, TDat, THashFunc >::GetDat(), GetFltAttrDefaultE(), THash< TKey, TDat, THashFunc >::GetKeyId(), TVec< TVal, TSizeTy >::Ins(), IsEdge(), THash< TKey, TDat, THashFunc >::IsKey(), KeyToIndexTypeE, TVec< TVal, TSizeTy >::Len(), MxEId, TPair< TVal1, TVal2 >::Val2, and VecOfFltVecsE.

                                                                                 {
  int i;
  TInt CurrLen;

  if (!IsEdge(EId)) {
    //AddEdge(EId);
     return -1;
  }
  if (KeyToIndexTypeE.IsKey(attr)) {
    TVec<TFlt>& NewVec = VecOfFltVecsE[KeyToIndexTypeE.GetDat(attr).Val2];
    NewVec[CrossH.GetKeyId(EId)] = value;
  } else {
    CurrLen = VecOfFltVecsE.Len();
    KeyToIndexTypeE.AddDat(attr, TIntPr(FltType, CurrLen));
    TVec<TFlt> NewVec = TVec<TFlt>();
    for (i = 0; i < MxEId; i++) {
      NewVec.Ins(i, GetFltAttrDefaultE(attr));
    }
    NewVec[CrossH.GetKeyId(EId)] = value;
    VecOfFltVecsE.Add(NewVec);
  }
  return 0;
}

Here is the call graph for this function:

int TCrossNet::AddFltAttrE	(	const TStr &	attr,
		TFlt	defaultValue = TFlt::Mn
	)

Adds a new Flt edge attribute to the hashmap.

Definition at line 606 of file mmnet.cpp.

References TVec< TVal, TSizeTy >::Add(), THash< TKey, TDat, THashFunc >::AddDat(), FltDefaultsE, FltType, TVec< TVal, TSizeTy >::Ins(), THash< TKey, TDat, THashFunc >::IsKey(), KeyToIndexTypeE, TVec< TVal, TSizeTy >::Len(), MxEId, and VecOfFltVecsE.

                                                              {
  int i;
  TInt CurrLen;
  TVec<TFlt> NewVec;
  CurrLen = VecOfFltVecsE.Len();
  KeyToIndexTypeE.AddDat(attr, TIntPr(FltType, CurrLen));
  NewVec = TVec<TFlt>();
  for (i = 0; i < MxEId; i++) {
    NewVec.Ins(i, defaultValue);
  }
  VecOfFltVecsE.Add(NewVec);
  if (!FltDefaultsE.IsKey(attr)) {
    FltDefaultsE.AddDat(attr, defaultValue);
  } else {
    return -1;
  }
  return 0;
}

Here is the call graph for this function:

int TCrossNet::AddIntAttrDatE ( const TCrossEdgeI &  EdgeI, const TInt &  value, const TStr &  attr  )

inline

Attribute based add function for attr to Int value.

Definition at line 404 of file mmnet.h.

References AddIntAttrDatE(), and TCrossNet::TCrossEdgeI::GetId().

Referenced by AddIntAttrDatE(), and TSnap::LoadCrossNet().

{ return AddIntAttrDatE(EdgeI.GetId(), value, attr); }

Here is the call graph for this function:

Here is the caller graph for this function:

int TCrossNet::AddIntAttrDatE	(	const int &	EId,
		const TInt &	value,
		const TStr &	attr
	)

Definition at line 470 of file mmnet.cpp.

References TVec< TVal, TSizeTy >::Add(), THash< TKey, TDat, THashFunc >::AddDat(), CrossH, THash< TKey, TDat, THashFunc >::GetDat(), GetIntAttrDefaultE(), THash< TKey, TDat, THashFunc >::GetKeyId(), TVec< TVal, TSizeTy >::Ins(), IntType, IsEdge(), THash< TKey, TDat, THashFunc >::IsKey(), KeyToIndexTypeE, TVec< TVal, TSizeTy >::Len(), MxEId, TPair< TVal1, TVal2 >::Val2, and VecOfIntVecsE.

                                                                                 {
  int i;
  TInt CurrLen;
  if (!IsEdge(EId)) {
    //AddEdge(EId);
     return -1;
  }
  if (KeyToIndexTypeE.IsKey(attr)) {
    TVec<TInt>& NewVec = VecOfIntVecsE[KeyToIndexTypeE.GetDat(attr).Val2];
    NewVec[CrossH.GetKeyId(EId)] = value;
  } else {
    CurrLen = VecOfIntVecsE.Len();
    KeyToIndexTypeE.AddDat(attr, TIntPr(IntType, CurrLen));
    TVec<TInt> NewVec = TVec<TInt>();
    for (i = 0; i < MxEId; i++) {
      NewVec.Ins(i, GetIntAttrDefaultE(attr));
    }
    NewVec[CrossH.GetKeyId(EId)] = value;
    VecOfIntVecsE.Add(NewVec);
  }
  return 0;
}

Here is the call graph for this function:

int TCrossNet::AddIntAttrE	(	const TStr &	attr,
		TInt	defaultValue = TInt::Mn
	)

Adds a new Int edge attribute to the hashmap.

Definition at line 567 of file mmnet.cpp.

References TVec< TVal, TSizeTy >::Add(), THash< TKey, TDat, THashFunc >::AddDat(), TVec< TVal, TSizeTy >::Ins(), IntDefaultsE, IntType, THash< TKey, TDat, THashFunc >::IsKey(), KeyToIndexTypeE, TVec< TVal, TSizeTy >::Len(), MxEId, and VecOfIntVecsE.

                                                             {
  // TODO(nkhadke): add error checking
  int i;
  TInt CurrLen;
  TVec<TInt> NewVec;
  CurrLen = VecOfIntVecsE.Len();
  KeyToIndexTypeE.AddDat(attr, TIntPr(IntType, CurrLen));
  NewVec = TVec<TInt>();
  for (i = 0; i < MxEId; i++) {
    NewVec.Ins(i, defaultValue);
  }
  VecOfIntVecsE.Add(NewVec);
  if (!IntDefaultsE.IsKey(attr)) {
    IntDefaultsE.AddDat(attr, defaultValue);
  } else {
    return -1;
  }
  return 0;
}

Here is the call graph for this function:

int TCrossNet::AddStrAttrDatE ( const TCrossEdgeI &  EdgeI, const TStr &  value, const TStr &  attr  )

inline

Attribute based add function for attr to Str value.

Definition at line 407 of file mmnet.h.

References AddStrAttrDatE(), and TCrossNet::TCrossEdgeI::GetId().

Referenced by AddStrAttrDatE(), and TSnap::LoadCrossNet().

{ return AddStrAttrDatE(EdgeI.GetId(), value, attr); }

Here is the call graph for this function:

Here is the caller graph for this function:

int TCrossNet::AddStrAttrDatE	(	const int &	EId,
		const TStr &	value,
		const TStr &	attr
	)

Definition at line 493 of file mmnet.cpp.

References THash< TKey, TDat, THashFunc >::AddDat(), CrossH, THash< TKey, TDat, THashFunc >::GetDat(), THash< TKey, TDat, THashFunc >::GetKeyId(), GetStrAttrDefaultE(), TVec< TVal, TSizeTy >::Ins(), IsEdge(), THash< TKey, TDat, THashFunc >::IsKey(), KeyToIndexTypeE, MxEId, StrType, TPair< TVal1, TVal2 >::Val2, and VecOfStrVecsE.

                                                                                 {
  int i;
  TInt CurrLen;
  if (!IsEdge(EId)) {
    //AddEdge(EId);
     return -1;
  }
  if (KeyToIndexTypeE.IsKey(attr)) {
    TVec<TStr>& NewVec = VecOfStrVecsE[KeyToIndexTypeE.GetDat(attr).Val2];
    NewVec[CrossH.GetKeyId(EId)] = value;
  } else {
    CurrLen = VecOfStrVecsE.Len();
    KeyToIndexTypeE.AddDat(attr, TIntPr(StrType, CurrLen));
    TVec<TStr> NewVec = TVec<TStr>();
    for (i = 0; i < MxEId; i++) {
      NewVec.Ins(i, GetStrAttrDefaultE(attr));
    }
    NewVec[CrossH.GetKeyId(EId)] = value;
    VecOfStrVecsE.Add(NewVec);
  }
  return 0;
} 

Here is the call graph for this function:

int TCrossNet::AddStrAttrE	(	const TStr &	attr,
		TStr	defaultValue = TStr::GetNullStr()
	)

Adds a new Str edge attribute to the hashmap.

Definition at line 587 of file mmnet.cpp.

References THash< TKey, TDat, THashFunc >::AddDat(), TVec< TVal, TSizeTy >::Ins(), THash< TKey, TDat, THashFunc >::IsKey(), KeyToIndexTypeE, MxEId, StrDefaultsE, StrType, and VecOfStrVecsE.

                                                              {
  int i;
  TInt CurrLen;
  TVec<TStr> NewVec;
  CurrLen = VecOfStrVecsE.Len();
  KeyToIndexTypeE.AddDat(attr, TIntPr(StrType, CurrLen));
  NewVec = TVec<TStr>();
  for (i = 0; i < MxEId; i++) {
    NewVec.Ins(i, defaultValue);
  }
  VecOfStrVecsE.Add(NewVec);
  if (!StrDefaultsE.IsKey(attr)) {
    StrDefaultsE.AddDat(attr, defaultValue);
  } else {
    return -1;
  }
  return 0;
}

Here is the call graph for this function:

void TCrossNet::AttrNameEI ( const TInt &  EId, TStrV &  Names  ) const

inline

Returns a vector of attr names for edge EId.

Definition at line 369 of file mmnet.h.

References THash< TKey, TDat, THashFunc >::BegI().

                                                       {
    AttrNameEI(EId, KeyToIndexTypeE.BegI(), Names);}

Here is the call graph for this function:

void TCrossNet::AttrNameEI	(	const TInt &	EId,
		TStrIntPrH::TIter	CrossHI,
		TStrV &	Names
	)		const

Definition at line 329 of file mmnet.cpp.

References TVec< TVal, TSizeTy >::Add(), EdgeAttrIsDeleted(), THashKeyDatI< TKey, TDat >::GetKey(), and THashKeyDatI< TKey, TDat >::IsEnd().

                                                                                       {
  Names = TVec<TStr>();
  while (!CrossHI.IsEnd()) {
    if (!EdgeAttrIsDeleted(EId, CrossHI)) {
      Names.Add(CrossHI.GetKey());
    }
    CrossHI++;
  }  
}

Here is the call graph for this function:

void TCrossNet::AttrValueEI ( const TInt &  EId, TStrV &  Values  ) const

inline

Returns a vector of attr values for edge EId.

Definition at line 373 of file mmnet.h.

References THash< TKey, TDat, THashFunc >::BegI().

                                                         {
    AttrValueEI(EId, KeyToIndexTypeE.BegI(), Values);}

Here is the call graph for this function:

void TCrossNet::AttrValueEI	(	const TInt &	EId,
		TStrIntPrH::TIter	CrossHI,
		TStrV &	Values
	)		const

Definition at line 339 of file mmnet.cpp.

References TVec< TVal, TSizeTy >::Add(), EdgeAttrIsDeleted(), GetEdgeAttrValue(), and THashKeyDatI< TKey, TDat >::IsEnd().

                                                                                         {
  Values = TVec<TStr>();
  while (!CrossHI.IsEnd()) {
    if (!EdgeAttrIsDeleted(EId, CrossHI)) {
      Values.Add(GetEdgeAttrValue(EId, CrossHI));
    }
    CrossHI++;
  }  
}

Here is the call graph for this function:

TAFltI TCrossNet::BegEAFltI ( const TStr &  attr ) const

inline

Returns an iterator referring to the first edge's flt attribute.

Definition at line 448 of file mmnet.h.

References TVec< TVal, TSizeTy >::BegI(), THash< TKey, TDat, THashFunc >::GetDat(), and TPair< TVal1, TVal2 >::Val2.

                                           {
    return TAFltI(VecOfFltVecsE[KeyToIndexTypeE.GetDat(attr).Val2].BegI(), attr, this);
  }

Here is the call graph for this function:

TAIntI TCrossNet::BegEAIntI ( const TStr &  attr ) const

inline

Returns an iterator referring to the first edge's int attribute.

Definition at line 424 of file mmnet.h.

References TVec< TVal, TSizeTy >::BegI(), THash< TKey, TDat, THashFunc >::GetDat(), and TPair< TVal1, TVal2 >::Val2.

                                           {
    return TAIntI(VecOfIntVecsE[KeyToIndexTypeE.GetDat(attr).Val2].BegI(), attr, this);
  }

Here is the call graph for this function:

TAStrI TCrossNet::BegEAStrI ( const TStr &  attr ) const

inline

Returns an iterator referring to the first edge's str attribute.

Definition at line 437 of file mmnet.h.

References TVec< TVal, TSizeTy >::BegI(), THash< TKey, TDat, THashFunc >::GetDat(), and TPair< TVal1, TVal2 >::Val2.

                                           {
    return TAStrI(VecOfStrVecsE[KeyToIndexTypeE.GetDat(attr).Val2].BegI(), attr, this);   }

Here is the call graph for this function:

TCrossEdgeI TCrossNet::BegEdgeI ( ) const

inline

Definition at line 335 of file mmnet.h.

References THash< TKey, TDat, THashFunc >::BegI().

Referenced by TMMNet::ToNetwork(), and TMMNet::ToNetwork2().

{ return TCrossEdgeI(CrossH.BegI(), this); }

Here is the call graph for this function:

Here is the caller graph for this function:

void TCrossNet::Clr

(

)

Deletes all nodes and edges from the graph.

Definition at line 219 of file mmnet.cpp.

References THash< TKey, TDat, THashFunc >::Clr(), TVec< TVal, TSizeTy >::Clr(), TMMNet::ClrNbr(), CrossH, CrossNetId, FltDefaultsE, IntDefaultsE, IsDirect, KeyToIndexTypeE, Mode1, Mode2, MxEId, Net, StrDefaultsE, TBool::Val, VecOfFltVecsE, VecOfIntVecsE, and VecOfStrVecsE.

Referenced by TModeNet::Clr().

                    {
  CrossH.Clr();
  MxEId=0;
  KeyToIndexTypeE.Clr();
  IntDefaultsE.Clr();
  StrDefaultsE.Clr();
  FltDefaultsE.Clr();
  VecOfIntVecsE.Clr();
  VecOfStrVecsE.Clr();
  VecOfFltVecsE.Clr(); 
  Net->ClrNbr(Mode1, CrossNetId, true, Mode1==Mode2, IsDirect.Val);
  Net->ClrNbr(Mode2, CrossNetId, false, Mode1==Mode2, IsDirect.Val); 
}

Here is the call graph for this function:

Here is the caller graph for this function:

int TCrossNet::DelAttrDatE ( const TCrossEdgeI &  EdgeI, const TStr &  attr  )

inline

Deletes the edge attribute for NodeI.

Definition at line 461 of file mmnet.h.

References DelAttrDatE(), and TCrossNet::TCrossEdgeI::GetId().

Referenced by DelAttrDatE().

{ return DelAttrDatE(EdgeI.GetId(), attr); } 

Here is the call graph for this function:

Here is the caller graph for this function:

int TCrossNet::DelAttrDatE	(	const int &	EId,
		const TStr &	attr
	)

Definition at line 552 of file mmnet.cpp.

References CrossH, FltType, THash< TKey, TDat, THashFunc >::GetDat(), GetFltAttrDefaultE(), GetIntAttrDefaultE(), THash< TKey, TDat, THashFunc >::GetKeyId(), GetStrAttrDefaultE(), IntType, KeyToIndexTypeE, StrType, TPair< TVal1, TVal2 >::Val2, VecOfFltVecsE, VecOfIntVecsE, and VecOfStrVecsE.

                                                           {
  // TODO(nkhadke): add error checking
  TInt vecType = KeyToIndexTypeE(attr).Val1;
  if (vecType == IntType) {
    VecOfIntVecsE[KeyToIndexTypeE.GetDat(attr).Val2][CrossH.GetKeyId(EId)] = GetIntAttrDefaultE(attr);
  } else if (vecType == StrType) {
    VecOfStrVecsE[KeyToIndexTypeE.GetDat(attr).Val2][CrossH.GetKeyId(EId)] = GetStrAttrDefaultE(attr);
  } else if (vecType == FltType) {
    VecOfFltVecsE[KeyToIndexTypeE.GetDat(attr).Val2][CrossH.GetKeyId(EId)] = GetFltAttrDefaultE(attr);
  } else {
    return -1;
  }
  return 0;
}

Here is the call graph for this function:

int TCrossNet::DelAttrE

(

const TStr &

attr

)

Removes all the values for edge attr.

Definition at line 625 of file mmnet.cpp.

References THash< TKey, TDat, THashFunc >::DelKey(), FltDefaultsE, FltType, THash< TKey, TDat, THashFunc >::GetDat(), IntDefaultsE, IntType, THash< TKey, TDat, THashFunc >::IsKey(), KeyToIndexTypeE, StrDefaultsE, StrType, TPair< TVal1, TVal2 >::Val2, VecOfFltVecsE, VecOfIntVecsE, and VecOfStrVecsE.

                                        {
  TInt vecType = KeyToIndexTypeE(attr).Val1;
  if (vecType == IntType) {
    VecOfIntVecsE[KeyToIndexTypeE.GetDat(attr).Val2] = TVec<TInt>();
    if (IntDefaultsE.IsKey(attr)) {
      IntDefaultsE.DelKey(attr);
    }
  } else if (vecType == StrType) {
    VecOfStrVecsE[KeyToIndexTypeE.GetDat(attr).Val2] = TVec<TStr>();
    if (StrDefaultsE.IsKey(attr)) {
      StrDefaultsE.DelKey(attr);
    }  
  } else if (vecType == FltType) {
    VecOfFltVecsE[KeyToIndexTypeE.GetDat(attr).Val2] = TVec<TFlt>();
    if (FltDefaultsE.IsKey(attr)) {
      FltDefaultsE.DelKey(attr);
    }
  } else {
    return -1;
  }
  KeyToIndexTypeE.DelKey(attr);
  return 0;
}

Here is the call graph for this function:

int TCrossNet::DelEdge

(

const int &

EId

)

Deletes an edge by its id.

Definition at line 301 of file mmnet.cpp.

References CrossH, CrossNetId, THash< TKey, TDat, THashFunc >::DelKey(), TModeNet::DelNeighbor(), TCrossNet::TCrossEdge::DstNId, TMMNet::GetCrossName(), THash< TKey, TDat, THashFunc >::GetDat(), THash< TKey, TDat, THashFunc >::GetKeyId(), TMMNet::GetModeNetById(), TStr::GetNullStr(), IsDirect, TVec< TVal, TSizeTy >::Len(), TInt::Mn, TFlt::Mn, Mode1, Mode2, Net, TCrossNet::TCrossEdge::SrcNId, VecOfFltVecsE, VecOfIntVecsE, and VecOfStrVecsE.

Referenced by TModeNet::DelNode().

                                     {
  TCrossEdge& Edge = CrossH.GetDat(EId);
  int srcNode = Edge.SrcNId;
  int dstNode = Edge.DstNId;
  TStr ThisCrossName = Net->GetCrossName(this->CrossNetId);
  Net->GetModeNetById(this->Mode1).DelNeighbor(srcNode, EId, true, ThisCrossName, Mode1==Mode2, IsDirect);
  Net->GetModeNetById(this->Mode2).DelNeighbor(dstNode, EId, false, ThisCrossName, Mode1==Mode2, IsDirect);
  int i;
  for (i = 0; i < VecOfIntVecsE.Len(); i++) {
    TVec<TInt>& IntVec = VecOfIntVecsE[i];
    IntVec[CrossH.GetKeyId(EId)] =  TInt::Mn;
  }
  for (i = 0; i < VecOfStrVecsE.Len(); i++) {
    TVec<TStr>& StrVec = VecOfStrVecsE[i];
    StrVec[CrossH.GetKeyId(EId)] =  TStr::GetNullStr();
  }
  for (i = 0; i < VecOfFltVecsE.Len(); i++) {
    TVec<TFlt>& FltVec = VecOfFltVecsE[i];
    FltVec[CrossH.GetKeyId(EId)] = TFlt::Mn;
  }
  CrossH.DelKey(EId);
  return 0;
}

Here is the call graph for this function:

Here is the caller graph for this function:

bool TCrossNet::EdgeAttrIsDeleted	(	const int &	EId,
		const TStrIntPrH::TIter &	CrossHI
	)		const

Definition at line 431 of file mmnet.cpp.

References EdgeAttrIsFltDeleted(), EdgeAttrIsIntDeleted(), and EdgeAttrIsStrDeleted().

Referenced by AttrNameEI(), and AttrValueEI().

                                                                                      {
  bool IntDel = EdgeAttrIsIntDeleted(EId, CrossHI);
  bool StrDel = EdgeAttrIsStrDeleted(EId, CrossHI);
  bool FltDel = EdgeAttrIsFltDeleted(EId, CrossHI);
  return IntDel || StrDel || FltDel;
}

Here is the call graph for this function:

Here is the caller graph for this function:

bool TCrossNet::EdgeAttrIsFltDeleted	(	const int &	EId,
		const TStrIntPrH::TIter &	CrossHI
	)		const

Definition at line 450 of file mmnet.cpp.

References CrossH, FltType, THashKeyDatI< TKey, TDat >::GetDat(), GetFltAttrDefaultE(), THashKeyDatI< TKey, TDat >::GetKey(), THash< TKey, TDat, THashFunc >::GetKeyId(), TVec< TVal, TSizeTy >::GetVal(), and VecOfFltVecsE.

Referenced by EdgeAttrIsDeleted(), FltAttrNameEI(), FltAttrValueEI(), and IsFltAttrDeletedE().

                                                                                         {
  return (CrossHI.GetDat().Val1 == FltType &&
    GetFltAttrDefaultE(CrossHI.GetKey()) == this->VecOfFltVecsE.GetVal(
    this->KeyToIndexTypeE.GetDat(CrossHI.GetKey()).Val2).GetVal(CrossH.GetKeyId(EId)));
}

Here is the call graph for this function:

Here is the caller graph for this function:

bool TCrossNet::EdgeAttrIsIntDeleted	(	const int &	EId,
		const TStrIntPrH::TIter &	CrossHI
	)		const

Definition at line 438 of file mmnet.cpp.

References CrossH, THashKeyDatI< TKey, TDat >::GetDat(), GetIntAttrDefaultE(), THashKeyDatI< TKey, TDat >::GetKey(), THash< TKey, TDat, THashFunc >::GetKeyId(), TVec< TVal, TSizeTy >::GetVal(), IntType, and VecOfIntVecsE.

Referenced by EdgeAttrIsDeleted(), IntAttrNameEI(), IntAttrValueEI(), and IsIntAttrDeletedE().

                                                                                         {
  return (CrossHI.GetDat().Val1 == IntType &&
    GetIntAttrDefaultE(CrossHI.GetKey()) == this->VecOfIntVecsE.GetVal(
    this->KeyToIndexTypeE.GetDat(CrossHI.GetKey()).Val2).GetVal(CrossH.GetKeyId(EId)));
}

Here is the call graph for this function:

Here is the caller graph for this function:

bool TCrossNet::EdgeAttrIsStrDeleted	(	const int &	EId,
		const TStrIntPrH::TIter &	CrossHI
	)		const

Definition at line 444 of file mmnet.cpp.

References CrossH, THashKeyDatI< TKey, TDat >::GetDat(), THashKeyDatI< TKey, TDat >::GetKey(), THash< TKey, TDat, THashFunc >::GetKeyId(), GetStrAttrDefaultE(), StrType, and VecOfStrVecsE.

Referenced by EdgeAttrIsDeleted(), IsStrAttrDeletedE(), StrAttrNameEI(), and StrAttrValueEI().

                                                                                         {
  return (CrossHI.GetDat().Val1 == StrType &&
    GetStrAttrDefaultE(CrossHI.GetKey()) == this->VecOfStrVecsE.GetVal(
    this->KeyToIndexTypeE.GetDat(CrossHI.GetKey()).Val2).GetVal(CrossH.GetKeyId(EId)));
}

Here is the call graph for this function:

Here is the caller graph for this function:

TAFltI TCrossNet::EndEAFltI ( const TStr &  attr ) const

inline

Returns an iterator referring to the past-the-end edge's attribute.

Definition at line 452 of file mmnet.h.

References TVec< TVal, TSizeTy >::EndI(), THash< TKey, TDat, THashFunc >::GetDat(), and TPair< TVal1, TVal2 >::Val2.

                                           {
    return TAFltI(VecOfFltVecsE[KeyToIndexTypeE.GetDat(attr).Val2].EndI(), attr, this);
  }

Here is the call graph for this function:

TAIntI TCrossNet::EndEAIntI ( const TStr &  attr ) const

inline

Returns an iterator referring to the past-the-end edge's attribute.

Definition at line 428 of file mmnet.h.

References TVec< TVal, TSizeTy >::EndI(), THash< TKey, TDat, THashFunc >::GetDat(), and TPair< TVal1, TVal2 >::Val2.

                                           {
    return TAIntI(VecOfIntVecsE[KeyToIndexTypeE.GetDat(attr).Val2].EndI(), attr, this);
  }

Here is the call graph for this function:

TAStrI TCrossNet::EndEAStrI ( const TStr &  attr ) const

inline

Returns an iterator referring to the past-the-end edge's attribute.

Definition at line 440 of file mmnet.h.

References TVec< TVal, TSizeTy >::EndI(), THash< TKey, TDat, THashFunc >::GetDat(), and TPair< TVal1, TVal2 >::Val2.

                                           {
    return TAStrI(VecOfStrVecsE[KeyToIndexTypeE.GetDat(attr).Val2].EndI(), attr, this);
  }

Here is the call graph for this function:

TCrossEdgeI TCrossNet::EndEdgeI ( ) const

inline

Definition at line 336 of file mmnet.h.

References THash< TKey, TDat, THashFunc >::EndI().

Referenced by TMMNet::ToNetwork(), and TMMNet::ToNetwork2().

{ return TCrossEdgeI(CrossH.EndI(), this); }

Here is the call graph for this function:

Here is the caller graph for this function:

void TCrossNet::FltAttrNameEI ( const TInt &  EId, TStrV &  Names  ) const

inline

Returns a vector of int attr names for node NId.

Definition at line 395 of file mmnet.h.

References THash< TKey, TDat, THashFunc >::BegI().

                                                          {
    FltAttrNameEI(EId, KeyToIndexTypeE.BegI(), Names);}

Here is the call graph for this function:

void TCrossNet::FltAttrNameEI	(	const TInt &	EId,
		TStrIntPrH::TIter	CrossHI,
		TStrV &	Names
	)		const

Definition at line 391 of file mmnet.cpp.

References TVec< TVal, TSizeTy >::Add(), EdgeAttrIsFltDeleted(), FltType, THashKeyDatI< TKey, TDat >::GetDat(), THashKeyDatI< TKey, TDat >::GetKey(), and THashKeyDatI< TKey, TDat >::IsEnd().

                                                                                          {
  Names = TVec<TStr>();
  while (!CrossHI.IsEnd()) {
    if (CrossHI.GetDat().Val1 == FltType && !EdgeAttrIsFltDeleted(EId, CrossHI)) {
      Names.Add(CrossHI.GetKey());
    }
    CrossHI++;
  }  
}

Here is the call graph for this function:

void TCrossNet::FltAttrValueEI ( const TInt &  EId, TFltV &  Values  ) const

inline

Returns a vector of attr values for node NId.

Definition at line 399 of file mmnet.h.

References THash< TKey, TDat, THashFunc >::BegI().

                                                            {
    FltAttrValueEI(EId, KeyToIndexTypeE.BegI(), Values);}

Here is the call graph for this function:

void TCrossNet::FltAttrValueEI	(	const TInt &	EId,
		TStrIntPrH::TIter	CrossHI,
		TFltV &	Values
	)		const

Definition at line 401 of file mmnet.cpp.

References TVec< TVal, TSizeTy >::Add(), EdgeAttrIsFltDeleted(), FltType, THashKeyDatI< TKey, TDat >::GetDat(), TVec< TVal, TSizeTy >::GetVal(), THashKeyDatI< TKey, TDat >::IsEnd(), and VecOfFltVecsE.

                                                                                            {
  Values = TVec<TFlt>();
  while (!CrossHI.IsEnd()) {
    if (CrossHI.GetDat().Val1 == FltType && !EdgeAttrIsFltDeleted(EId, CrossHI)) {
      TFlt val = (this->VecOfFltVecsE.GetVal(CrossHI.GetDat().Val2).GetVal(EId));
      Values.Add(val);
    }
    CrossHI++;
  }  
}

Here is the call graph for this function:

int TCrossNet::GetAttrTypeE ( const TStr &  attr ) const

private

Definition at line 212 of file mmnet.cpp.

References THash< TKey, TDat, THashFunc >::GetDat(), THash< TKey, TDat, THashFunc >::IsKey(), KeyToIndexTypeE, and TPair< TVal1, TVal2 >::Val1.

Referenced by TMMNet::AddEdgeAttributes(), and TMMNet::ToNetwork().

                                                  {
  if (KeyToIndexTypeE.IsKey(attr)) {
    return KeyToIndexTypeE.GetDat(attr).Val1;
  }
  return -1;
}

Here is the call graph for this function:

Here is the caller graph for this function:

TAFltI TCrossNet::GetEAFltI ( const TStr &  attr, const int &  EId  ) const

inline

Returns an iterator referring to the edge of ID EId in the graph.

Definition at line 456 of file mmnet.h.

References THash< TKey, TDat, THashFunc >::GetDat(), TVec< TVal, TSizeTy >::GetI(), THash< TKey, TDat, THashFunc >::GetKeyId(), and TPair< TVal1, TVal2 >::Val2.

                                                           {
    return TAFltI(VecOfFltVecsE[KeyToIndexTypeE.GetDat(attr).Val2].GetI(CrossH.GetKeyId(EId)), attr, this);
  }

Here is the call graph for this function:

TAIntI TCrossNet::GetEAIntI ( const TStr &  attr, const int &  EId  ) const

inline

Returns an iterator referring to the edge of ID EId in the graph.

Definition at line 432 of file mmnet.h.

References THash< TKey, TDat, THashFunc >::GetDat(), TVec< TVal, TSizeTy >::GetI(), THash< TKey, TDat, THashFunc >::GetKeyId(), and TPair< TVal1, TVal2 >::Val2.

                                                           {
    return TAIntI(VecOfIntVecsE[KeyToIndexTypeE.GetDat(attr).Val2].GetI(CrossH.GetKeyId(EId)), attr, this);
  }

Here is the call graph for this function:

TAStrI TCrossNet::GetEAStrI ( const TStr &  attr, const int &  EId  ) const

inline

Returns an iterator referring to the edge of ID EId in the graph.

Definition at line 444 of file mmnet.h.

References THash< TKey, TDat, THashFunc >::GetDat(), TVec< TVal, TSizeTy >::GetI(), THash< TKey, TDat, THashFunc >::GetKeyId(), and TPair< TVal1, TVal2 >::Val2.

                                                           {
    return TAStrI(VecOfStrVecsE[KeyToIndexTypeE.GetDat(attr).Val2].GetI(CrossH.GetKeyId(EId)), attr, this);
  }

Here is the call graph for this function:

TCrossEdge& TCrossNet::GetEdge ( int  eid )

inlineprivate

Definition at line 320 of file mmnet.h.

Referenced by TMMNet::ToNetworkMP().

{ return CrossH[eid]; }

Here is the caller graph for this function:

TStr TCrossNet::GetEdgeAttrValue	(	const int &	EId,
		const TStrIntPrH::TIter &	CrossHI
	)		const

Definition at line 456 of file mmnet.cpp.

References CrossH, FltType, THashKeyDatI< TKey, TDat >::GetDat(), THash< TKey, TDat, THashFunc >::GetDat(), THashKeyDatI< TKey, TDat >::GetKey(), THash< TKey, TDat, THashFunc >::GetKeyId(), TStr::GetNullStr(), TStr::GetStr(), TVec< TVal, TSizeTy >::GetVal(), IntType, KeyToIndexTypeE, StrType, VecOfFltVecsE, VecOfIntVecsE, and VecOfStrVecsE.

Referenced by AttrValueEI().

                                                                                     {
  if (CrossHI.GetDat().Val1 == IntType) {
    return (this->VecOfIntVecsE.GetVal(
      this->KeyToIndexTypeE.GetDat(CrossHI.GetKey()).Val2).GetVal(CrossH.GetKeyId(EId))).GetStr();
  } else if(CrossHI.GetDat().Val1 == StrType) {
    return this->VecOfStrVecsE.GetVal(
    this->KeyToIndexTypeE.GetDat(CrossHI.GetKey()).Val2).GetVal(CrossH.GetKeyId(EId));
  } else if (CrossHI.GetDat().Val1 == FltType) {
    return (this->VecOfFltVecsE.GetVal(
      this->KeyToIndexTypeE.GetDat(CrossHI.GetKey()).Val2).GetVal(CrossH.GetKeyId(EId))).GetStr();
  }
  return TStr::GetNullStr();
}

Here is the call graph for this function:

Here is the caller graph for this function:

TCrossEdgeI TCrossNet::GetEdgeI ( const int &  EId ) const

inline

Edge iterators.

Definition at line 334 of file mmnet.h.

References THash< TKey, TDat, THashFunc >::GetI().

Referenced by TMMNet::ToNetworkMP().

{ return TCrossEdgeI(CrossH.GetI(EId), this); }

Here is the call graph for this function:

Here is the caller graph for this function:

int TCrossNet::GetEdges ( ) const

inline

Returns the number of edges in the graph.

Definition at line 327 of file mmnet.h.

References THash< TKey, TDat, THashFunc >::Len().

Referenced by TMMNet::ToNetworkMP().

{ return CrossH.Len(); }

Here is the call graph for this function:

Here is the caller graph for this function:

TFlt TCrossNet::GetFltAttrDatE ( const TCrossEdgeI &  EdgeI, const TStr &  attr  )

inline

Gets the value of flt attr from the edge attr value vector.

Definition at line 420 of file mmnet.h.

References GetFltAttrDatE(), and TCrossNet::TCrossEdgeI::GetId().

Referenced by TMMNet::AddEdgeAttributes(), GetFltAttrDatE(), and TMMNet::ToNetwork().

{ return GetFltAttrDatE(EdgeI.GetId(), attr); }

Here is the call graph for this function:

Here is the caller graph for this function:

TFlt TCrossNet::GetFltAttrDatE	(	const int &	EId,
		const TStr &	attr
	)

Definition at line 548 of file mmnet.cpp.

References CrossH, THash< TKey, TDat, THashFunc >::GetDat(), THash< TKey, TDat, THashFunc >::GetKeyId(), KeyToIndexTypeE, TPair< TVal1, TVal2 >::Val2, and VecOfFltVecsE.

                                                               {
  return VecOfFltVecsE[KeyToIndexTypeE.GetDat(attr).Val2][CrossH.GetKeyId(EId)];
}

Here is the call graph for this function:

TFlt TCrossNet::GetFltAttrDefaultE ( const TStr &  attribute ) const

inlineprivate

Gets Flt edge attribute val. If not a proper attr, return default.

Definition at line 318 of file mmnet.h.

References THash< TKey, TDat, THashFunc >::GetDat(), THash< TKey, TDat, THashFunc >::IsKey(), and TFlt::Mn.

Referenced by AddEdge(), AddFltAttrDatE(), DelAttrDatE(), EdgeAttrIsFltDeleted(), TCrossNet::TAFltI::IsDeleted(), and TMMNet::ToNetwork().

{ return FltDefaultsE.IsKey(attribute) ? FltDefaultsE.GetDat(attribute) : (TFlt) TFlt::Mn; }

Here is the call graph for this function:

Here is the caller graph for this function:

TInt TCrossNet::GetIntAttrDatE ( const TCrossEdgeI &  EdgeI, const TStr &  attr  )

inline

Gets the value of int attr from the edge attr value vector.

Definition at line 414 of file mmnet.h.

References TCrossNet::TCrossEdgeI::GetId(), and GetIntAttrDatE().

Referenced by TMMNet::AddEdgeAttributes(), GetIntAttrDatE(), and TMMNet::ToNetwork().

{ return GetIntAttrDatE(EdgeI.GetId(), attr); }

Here is the call graph for this function:

Here is the caller graph for this function:

TInt TCrossNet::GetIntAttrDatE	(	const int &	EId,
		const TStr &	attr
	)

Definition at line 540 of file mmnet.cpp.

References CrossH, THash< TKey, TDat, THashFunc >::GetDat(), THash< TKey, TDat, THashFunc >::GetKeyId(), KeyToIndexTypeE, TPair< TVal1, TVal2 >::Val2, and VecOfIntVecsE.

                                                               {
  return VecOfIntVecsE[KeyToIndexTypeE.GetDat(attr).Val2][CrossH.GetKeyId(EId)];
}

Here is the call graph for this function:

TInt TCrossNet::GetIntAttrDefaultE ( const TStr &  attribute ) const

inlineprivate

Gets Int edge attribute val. If not a proper attr, return default.

Definition at line 314 of file mmnet.h.

References THash< TKey, TDat, THashFunc >::GetDat(), THash< TKey, TDat, THashFunc >::IsKey(), and TInt::Mn.

Referenced by AddEdge(), AddIntAttrDatE(), DelAttrDatE(), EdgeAttrIsIntDeleted(), TCrossNet::TAIntI::IsDeleted(), and TMMNet::ToNetwork().

{ return IntDefaultsE.IsKey(attribute) ? IntDefaultsE.GetDat(attribute) : (TInt) TInt::Mn; }

Here is the call graph for this function:

Here is the caller graph for this function:

int TCrossNet::GetMode1 ( ) const

inline

Gets the id of the src mode.

Definition at line 340 of file mmnet.h.

References Mode1.

Referenced by TCrossNet::TCrossEdgeI::GetSrcModeId(), TMMNet::ToNetwork(), TMMNet::ToNetwork2(), and TMMNet::ToNetworkMP().

{ return Mode1; }

Here is the caller graph for this function:

int TCrossNet::GetMode2 ( ) const

inline

Gets the id of the dst mode.

Definition at line 342 of file mmnet.h.

References Mode2.

Referenced by TCrossNet::TCrossEdgeI::GetDstModeId(), TMMNet::ToNetwork(), TMMNet::ToNetwork2(), and TMMNet::ToNetworkMP().

{return Mode2; }

Here is the caller graph for this function:

int TCrossNet::GetMxEId ( ) const

inline

Definition at line 325 of file mmnet.h.

References MxEId.

Referenced by TMMNet::ToNetworkMP().

{ return MxEId; }

Here is the caller graph for this function:

TStr TCrossNet::GetStrAttrDatE ( const TCrossEdgeI &  EdgeI, const TStr &  attr  )

inline

Gets the value of str attr from the edge attr value vector.

Definition at line 417 of file mmnet.h.

References TCrossNet::TCrossEdgeI::GetId(), and GetStrAttrDatE().

Referenced by TMMNet::AddEdgeAttributes(), GetStrAttrDatE(), and TMMNet::ToNetwork().

{ return GetStrAttrDatE(EdgeI.GetId(), attr); }

Here is the call graph for this function:

Here is the caller graph for this function:

TStr TCrossNet::GetStrAttrDatE	(	const int &	EId,
		const TStr &	attr
	)

Definition at line 544 of file mmnet.cpp.

References CrossH, THash< TKey, TDat, THashFunc >::GetDat(), THash< TKey, TDat, THashFunc >::GetKeyId(), KeyToIndexTypeE, TPair< TVal1, TVal2 >::Val2, and VecOfStrVecsE.

                                                               {
  return VecOfStrVecsE[KeyToIndexTypeE.GetDat(attr).Val2][CrossH.GetKeyId(EId)];
}

Here is the call graph for this function:

TStr TCrossNet::GetStrAttrDefaultE ( const TStr &  attribute ) const

inlineprivate

Gets Str edge attribute val. If not a proper attr, return default.

Definition at line 316 of file mmnet.h.

References THash< TKey, TDat, THashFunc >::GetDat(), TStr::GetNullStr(), and THash< TKey, TDat, THashFunc >::IsKey().

Referenced by AddEdge(), AddStrAttrDatE(), DelAttrDatE(), EdgeAttrIsStrDeleted(), TCrossNet::TAStrI::IsDeleted(), and TMMNet::ToNetwork().

{ return StrDefaultsE.IsKey(attribute) ? StrDefaultsE.GetDat(attribute) : (TStr) TStr::GetNullStr(); }

Here is the call graph for this function:

Here is the caller graph for this function:

void TCrossNet::IntAttrNameEI ( const TInt &  EId, TStrV &  Names  ) const

inline

Returns a vector of int attr names for edge EId.

Definition at line 377 of file mmnet.h.

References THash< TKey, TDat, THashFunc >::BegI().

                                                          {
    IntAttrNameEI(EId, KeyToIndexTypeE.BegI(), Names);}

Here is the call graph for this function:

void TCrossNet::IntAttrNameEI	(	const TInt &	EId,
		TStrIntPrH::TIter	CrossHI,
		TStrV &	Names
	)		const

Definition at line 349 of file mmnet.cpp.

References TVec< TVal, TSizeTy >::Add(), EdgeAttrIsIntDeleted(), THashKeyDatI< TKey, TDat >::GetDat(), THashKeyDatI< TKey, TDat >::GetKey(), IntType, and THashKeyDatI< TKey, TDat >::IsEnd().

                                                                                          {
  Names = TVec<TStr>();
  while (!CrossHI.IsEnd()) {
    if (CrossHI.GetDat().Val1 == IntType && !EdgeAttrIsIntDeleted(EId, CrossHI)) {
      Names.Add(CrossHI.GetKey());
    }
    CrossHI++;
  }  
}

Here is the call graph for this function:

void TCrossNet::IntAttrValueEI ( const TInt &  EId, TIntV &  Values  ) const

inline

Returns a vector of attr values for edge EId.

Definition at line 381 of file mmnet.h.

References THash< TKey, TDat, THashFunc >::BegI().

                                                            {
    IntAttrValueEI(EId, KeyToIndexTypeE.BegI(), Values);}

Here is the call graph for this function:

void TCrossNet::IntAttrValueEI	(	const TInt &	EId,
		TStrIntPrH::TIter	CrossHI,
		TIntV &	Values
	)		const

Definition at line 359 of file mmnet.cpp.

References TVec< TVal, TSizeTy >::Add(), EdgeAttrIsIntDeleted(), THashKeyDatI< TKey, TDat >::GetDat(), TVec< TVal, TSizeTy >::GetVal(), IntType, THashKeyDatI< TKey, TDat >::IsEnd(), and VecOfIntVecsE.

                                                                                            {
  Values = TVec<TInt>();
  while (!CrossHI.IsEnd()) {
    if (CrossHI.GetDat().Val1 == IntType && !EdgeAttrIsIntDeleted(EId, CrossHI)) {
      TInt val = (this->VecOfIntVecsE.GetVal(CrossHI.GetDat().Val2).GetVal(EId));
      Values.Add(val);
    }
    CrossHI++;
  }  
}

Here is the call graph for this function:

bool TCrossNet::IsAttrDeletedE	(	const int &	EId,
		const TStr &	attr
	)		const

Definition at line 412 of file mmnet.cpp.

References IsFltAttrDeletedE(), IsIntAttrDeletedE(), and IsStrAttrDeletedE().

                                                                     {
  bool IntDel = IsIntAttrDeletedE(EId, attr);
  bool StrDel = IsStrAttrDeletedE(EId, attr);
  bool FltDel = IsFltAttrDeletedE(EId, attr);
  return IntDel || StrDel || FltDel;
}

Here is the call graph for this function:

bool TCrossNet::IsDirected ( ) const

inline

Whether edges in the crossnet are directed.

Definition at line 367 of file mmnet.h.

References IsDirect.

Referenced by TCrossNet::TCrossEdgeI::IsDirected(), TMMNet::ToNetwork(), TMMNet::ToNetwork2(), and TMMNet::ToNetworkMP().

{ return IsDirect;}

Here is the caller graph for this function:

bool TCrossNet::IsEdge ( const int &  EId ) const

inline

Tests whether an edge with edge ID EId exists in the graph.

Definition at line 323 of file mmnet.h.

References THash< TKey, TDat, THashFunc >::IsKey().

Referenced by AddFltAttrDatE(), AddIntAttrDatE(), AddStrAttrDatE(), and TMMNet::ToNetworkMP().

{ return CrossH.IsKey(EId); }

Here is the call graph for this function:

Here is the caller graph for this function:

bool TCrossNet::IsFltAttrDeletedE	(	const int &	EId,
		const TStr &	attr
	)		const

Definition at line 427 of file mmnet.cpp.

References EdgeAttrIsFltDeleted(), THash< TKey, TDat, THashFunc >::GetI(), and KeyToIndexTypeE.

Referenced by IsAttrDeletedE().

                                                                        {
  return EdgeAttrIsFltDeleted(EId, KeyToIndexTypeE.GetI(attr));
}

Here is the call graph for this function:

Here is the caller graph for this function:

bool TCrossNet::IsIntAttrDeletedE	(	const int &	EId,
		const TStr &	attr
	)		const

Definition at line 419 of file mmnet.cpp.

References EdgeAttrIsIntDeleted(), THash< TKey, TDat, THashFunc >::GetI(), and KeyToIndexTypeE.

Referenced by IsAttrDeletedE().

                                                                        {
  return EdgeAttrIsIntDeleted(EId, KeyToIndexTypeE.GetI(attr));
}

Here is the call graph for this function:

Here is the caller graph for this function:

bool TCrossNet::IsStrAttrDeletedE	(	const int &	EId,
		const TStr &	attr
	)		const

Definition at line 423 of file mmnet.cpp.

References EdgeAttrIsStrDeleted(), THash< TKey, TDat, THashFunc >::GetI(), and KeyToIndexTypeE.

Referenced by IsAttrDeletedE().

                                                                        {
  return EdgeAttrIsStrDeleted(EId, KeyToIndexTypeE.GetI(attr));
}

Here is the call graph for this function:

Here is the caller graph for this function:

void TCrossNet::LoadShM ( TShMIn &  ShMIn )

inline

Loads network from shared memory stream.

Definition at line 348 of file mmnet.h.

References TVec< TVal, TSizeTy >::Load(), THash< TKey, TDat, THashFunc >::LoadShM(), and TVec< TVal, TSizeTy >::LoadShM().

Referenced by TMMNet::TCrossNetInit::operator()().

                              {
    CrossH.LoadShM(ShMIn);
    MxEId = TInt(ShMIn);
    Mode1 = TInt(ShMIn);
    Mode2 = TInt(ShMIn);
    IsDirect = TBool(ShMIn);
    CrossNetId = TInt(ShMIn);
    Net = NULL;
    KeyToIndexTypeE.LoadShM(ShMIn);
    IntDefaultsE.LoadShM(ShMIn);
    StrDefaultsE.LoadShM(ShMIn);
    FltDefaultsE.LoadShM(ShMIn);
    TLoadVecInit VecFn;
    VecOfIntVecsE.LoadShM(ShMIn, VecFn);
    VecOfStrVecsE.Load(ShMIn);
    VecOfFltVecsE.Load(ShMIn);
  }

Here is the call graph for this function:

Here is the caller graph for this function:

TCrossNet& TCrossNet::operator= ( const TCrossNet &  OtherTCrossNet )

inline

Definition at line 293 of file mmnet.h.

References CrossH, CrossNetId, FltDefaultsE, IntDefaultsE, IsDirect, KeyToIndexTypeE, Mode1, Mode2, MxEId, Net, StrDefaultsE, VecOfFltVecsE, VecOfIntVecsE, and VecOfStrVecsE.

                                                        {
    CrossH = OtherTCrossNet.CrossH;
    MxEId = OtherTCrossNet.MxEId;
    Mode1 = OtherTCrossNet.Mode1;
    Mode2 = OtherTCrossNet.Mode2;
    CrossNetId = OtherTCrossNet.CrossNetId;
    IsDirect = OtherTCrossNet.IsDirect;
    Net = OtherTCrossNet.Net;
    KeyToIndexTypeE = OtherTCrossNet.KeyToIndexTypeE;
    IntDefaultsE = OtherTCrossNet.IntDefaultsE;
    StrDefaultsE = OtherTCrossNet.StrDefaultsE;
    FltDefaultsE = OtherTCrossNet.FltDefaultsE;
    VecOfIntVecsE = OtherTCrossNet.VecOfIntVecsE;
    VecOfStrVecsE = OtherTCrossNet.VecOfStrVecsE;
    VecOfFltVecsE = OtherTCrossNet.VecOfFltVecsE;
    return *this;
  }

void TCrossNet::Save ( TSOut &  SOut ) const

inline

Saves the TCrossNet to the binary stream.

Definition at line 344 of file mmnet.h.

References THash< TKey, TDat, THashFunc >::Save(), TVec< TVal, TSizeTy >::Save(), TBool::Save(), and TInt::Save().

                               { CrossH.Save(SOut); MxEId.Save(SOut); Mode1.Save(SOut); Mode2.Save(SOut); IsDirect.Save(SOut); CrossNetId.Save(SOut); 
    KeyToIndexTypeE.Save(SOut); IntDefaultsE.Save(SOut); StrDefaultsE.Save(SOut); FltDefaultsE.Save(SOut); VecOfIntVecsE.Save(SOut);
    VecOfStrVecsE.Save(SOut); VecOfFltVecsE.Save(SOut); }

Here is the call graph for this function:

void TCrossNet::SetParentPointer ( TMMNet *  parent )

private

Definition at line 325 of file mmnet.cpp.

References Net.

Referenced by TMMNet::AddCrossNet(), and TMMNet::DelCrossNet().

                                               {
  Net = parent;
}

Here is the caller graph for this function:

void TCrossNet::StrAttrNameEI ( const TInt &  EId, TStrV &  Names  ) const

inline

Returns a vector of str attr names for node NId.

Definition at line 387 of file mmnet.h.

References THash< TKey, TDat, THashFunc >::BegI().

                                                          {
    StrAttrNameEI(EId, KeyToIndexTypeE.BegI(), Names);}

Here is the call graph for this function:

void TCrossNet::StrAttrNameEI	(	const TInt &	EId,
		TStrIntPrH::TIter	CrossHI,
		TStrV &	Names
	)		const

Definition at line 370 of file mmnet.cpp.

References TVec< TVal, TSizeTy >::Add(), EdgeAttrIsStrDeleted(), THashKeyDatI< TKey, TDat >::GetDat(), THashKeyDatI< TKey, TDat >::GetKey(), THashKeyDatI< TKey, TDat >::IsEnd(), and StrType.

                                                                                          {
  Names = TVec<TStr>();
  while (!CrossHI.IsEnd()) {
    if (CrossHI.GetDat().Val1 == StrType && !EdgeAttrIsStrDeleted(EId, CrossHI)) {
      Names.Add(CrossHI.GetKey());
    }
    CrossHI++;
  }  
}

Here is the call graph for this function:

void TCrossNet::StrAttrValueEI ( const TInt &  EId, TStrV &  Values  ) const

inline

Returns a vector of attr values for node NId.

Definition at line 391 of file mmnet.h.

References THash< TKey, TDat, THashFunc >::BegI().

                                                            {
    StrAttrValueEI(EId, KeyToIndexTypeE.BegI(), Values);}

Here is the call graph for this function:

void TCrossNet::StrAttrValueEI	(	const TInt &	EId,
		TStrIntPrH::TIter	CrossHI,
		TStrV &	Values
	)		const

Definition at line 380 of file mmnet.cpp.

References TVec< TVal, TSizeTy >::Add(), EdgeAttrIsStrDeleted(), THashKeyDatI< TKey, TDat >::GetDat(), THashKeyDatI< TKey, TDat >::IsEnd(), StrType, and VecOfStrVecsE.

                                                                                            {
  Values = TVec<TStr>();
  while (!CrossHI.IsEnd()) {
    if (CrossHI.GetDat().Val1 == StrType && !EdgeAttrIsStrDeleted(EId, CrossHI)) {
      TStr val = this->VecOfStrVecsE.GetVal(CrossHI.GetDat().Val2).GetVal(EId);
      Values.Add(val);
    }
    CrossHI++;
  }  
}

Here is the call graph for this function:

Friends And Related Function Documentation

friend class TMMNet

friend

Definition at line 495 of file mmnet.h.

friend class TModeNet

friend

Definition at line 496 of file mmnet.h.

Member Data Documentation

THash<TInt,TCrossEdge> TCrossNet::CrossH

private

Definition at line 264 of file mmnet.h.

Referenced by AddEdge(), AddFltAttrDatE(), AddIntAttrDatE(), AddStrAttrDatE(), Clr(), DelAttrDatE(), DelEdge(), EdgeAttrIsFltDeleted(), EdgeAttrIsIntDeleted(), EdgeAttrIsStrDeleted(), GetEdgeAttrValue(), GetFltAttrDatE(), GetIntAttrDatE(), GetStrAttrDatE(), and operator=().

TInt TCrossNet::CrossNetId

private

Definition at line 269 of file mmnet.h.

Referenced by AddEdge(), Clr(), DelEdge(), and operator=().

THash<TStr, TFlt> TCrossNet::FltDefaultsE

private

Definition at line 274 of file mmnet.h.

Referenced by AddEdge(), AddFltAttrE(), Clr(), DelAttrE(), and operator=().

THash<TStr, TInt> TCrossNet::IntDefaultsE

private

Definition at line 272 of file mmnet.h.

Referenced by AddEdge(), AddIntAttrE(), Clr(), DelAttrE(), and operator=().

TBool TCrossNet::IsDirect

private

The second mode. In the case of directed crossnets, this is implicitly understood to be the destination mode.

Definition at line 268 of file mmnet.h.

Referenced by AddEdge(), Clr(), DelEdge(), TModeNet::DelNode(), IsDirected(), and operator=().

TStrIntPrH TCrossNet::KeyToIndexTypeE

private

Definition at line 271 of file mmnet.h.

Referenced by AddEdge(), AddFltAttrDatE(), AddFltAttrE(), AddIntAttrDatE(), AddIntAttrE(), AddStrAttrDatE(), AddStrAttrE(), Clr(), DelAttrDatE(), DelAttrE(), GetAttrTypeE(), GetEdgeAttrValue(), GetFltAttrDatE(), GetIntAttrDatE(), GetStrAttrDatE(), IsFltAttrDeletedE(), IsIntAttrDeletedE(), IsStrAttrDeletedE(), and operator=().

TInt TCrossNet::Mode1

private

Definition at line 266 of file mmnet.h.

Referenced by AddEdge(), Clr(), TMMNet::DelCrossNet(), DelEdge(), TModeNet::DelNode(), GetMode1(), TMMNet::GetSubgraphByModeNet(), and operator=().

TInt TCrossNet::Mode2

private

The first mode. In the case of directed crossnets, this is implicitly understood to be the source mode.

Definition at line 267 of file mmnet.h.

Referenced by AddEdge(), Clr(), TMMNet::DelCrossNet(), DelEdge(), TModeNet::DelNode(), GetMode2(), TMMNet::GetSubgraphByModeNet(), and operator=().

TInt TCrossNet::MxEId

private

The HashTable from Edge id to the corresponding Edge.

Definition at line 265 of file mmnet.h.

Referenced by AddEdge(), AddFltAttrDatE(), AddFltAttrE(), AddIntAttrDatE(), AddIntAttrE(), AddStrAttrDatE(), AddStrAttrE(), Clr(), GetMxEId(), operator=(), and TMMNet::ToNetworkMP().

TMMNet* TCrossNet::Net

private

Definition at line 270 of file mmnet.h.

Referenced by AddEdge(), Clr(), DelEdge(), operator=(), and SetParentPointer().

THash<TStr, TStr> TCrossNet::StrDefaultsE

private

Definition at line 273 of file mmnet.h.

Referenced by AddEdge(), AddStrAttrE(), Clr(), DelAttrE(), and operator=().

TVec<TFltV> TCrossNet::VecOfFltVecsE

private

Definition at line 277 of file mmnet.h.

Referenced by AddEdge(), AddFltAttrDatE(), AddFltAttrE(), Clr(), DelAttrDatE(), DelAttrE(), DelEdge(), EdgeAttrIsFltDeleted(), FltAttrValueEI(), GetEdgeAttrValue(), GetFltAttrDatE(), and operator=().

TVec<TIntV> TCrossNet::VecOfIntVecsE

private

Definition at line 275 of file mmnet.h.

Referenced by AddEdge(), AddIntAttrDatE(), AddIntAttrE(), Clr(), DelAttrDatE(), DelAttrE(), DelEdge(), EdgeAttrIsIntDeleted(), GetEdgeAttrValue(), GetIntAttrDatE(), IntAttrValueEI(), and operator=().

TVec<TStrV> TCrossNet::VecOfStrVecsE

private

Definition at line 276 of file mmnet.h.

Referenced by AddEdge(), AddStrAttrDatE(), AddStrAttrE(), Clr(), DelAttrDatE(), DelAttrE(), DelEdge(), EdgeAttrIsStrDeleted(), GetEdgeAttrValue(), GetStrAttrDatE(), operator=(), and StrAttrValueEI().

---

The documentation for this class was generated from the following files:

• snap-core/mmnet.h
• snap-core/mmnet.cpp